lights even brighter & better sparks coming off L-2 Tags: don smith device
I know that electricity is produced from a rotating magnetic current, and a rotating magnetic current is produced around an electrified wire. This starter is designed so that a shaft with copper wire coiled around it has a current passed through it creating a rotational magnetic field that spins the shaft. Is it possible for [...]
Testing of a small wind turbine with PVC blades and a home made alternator. The blades are cut from 3″ PVC and are 1ft long plus 4 inches to mount it to the hub. The alternator uses 12 magnets and 9 coils, 3 coils on each phase. Tags: do home-built turbines require 2 manetic rotors [...]
IN THIS VIDEO I SHOW THE TECHNIQUE THAT I WILL USE FROM NOW ON WITH THE MAGNET RING FABRICATION. THE REASON FOR THIS IS , I REASEMBLED THE ALTERNATOR, AND AS I SLID IN THE STATOR , IT STUCK TO THE SIDES. WHEN I PULLED IT OVER TO THE MIDDLE, SOME OF THE MAGNETS CAME [...]
THIS IS A VIDEO TO SHOW THOSE WHO DONT WANT TO SPEND A LOT OF MONEY FOR THE BIG SYSTEMS OUT THERE. THE BLACK UNIT IN THE BACK GROUND IS THE ONE THAT IM MAKING FOR A FRIEND WHO WILL USE IT WITH GREAT GLADNESS. HIS ELECTRICAL SYSTEM WAS ALMOST COMPLETELY DESTROYED BY LIGHTENING. IT [...]
THIS IS A VIDEO TO SHOW THOSE WHO DONT WANT TO SPEND A LOT OF MONEY FOR THE BIG SYSTEMS OUT THERE. THE BLACK UNIT IN THE BACK GROUND IS THE ONE THAT IM MAKING FOR A FRIEND WHO WILL USE IT WITH GREAT GLADNESS. HIS ELECTRICAL SYSTEM WAS ALMOST COMPLETELY DESTROYED BY LIGHTENING. IT [...]
IN THIS LESSON WE ASSEMBLE OUR FRAME WORK COMPLETE WITH FURLING MECHANISM. AND THE PARTS LIST. I’M GLAD TO BE BACK. A FRIEND OF MINE SENT SOME PICTURES OF HIS BIRDS FLYING WELL. THEN HE SENT ONE WITH THE BIRDS AFTER DIVING INTO THE PORTCH OR DECK. NO BLADES OR MOTORS WERE DAMAGED. JUST PRIDE… [...]
New wind turbine design. Nine News 27th June 2007. Australia, Perth WA.
IN THIS SESSION OF CLASS, WE LEARN HOW TO OHM OUT THE WIRES TO FIND OUT WHICH WIRES GO TO WHICH COILS. AND THEN WE INSTALL THE MAGNETS’ STEEL BACKING IN THE FORM OF STEEL BANDING. THE NEXT CLASS IS ALREADY RECORDED AND IN THE EDITING ROOM. THANK YOU FOR WATCHING, AND MANY GOOD THINGS [...]
IN THIS VIDEO WE ALIGN THE MAGNETS AND GLUE THE FIRST SET IN FIRST AND LET IT DRY. THEN WE MOVE THE SECOND STACKS OF MAGNETS TO THE LEFT STACK AND GLUE THEM. AND WE LEARN ABOUT WORKING WITH THE MAGNETS INSTEAD OF AGAINST THE MAGNETS. MUDDy